Ian Eliason

@UCfmDfVqE4Vu8FGmcoZ3T__Q - 50 subscribers

Home Videos Live Playlists

Playing with the BM110 air supply.

Playing with the BM110 air supply. Ian Eliason

23 views - 1 month ago

More testing, swapped the thumping stepper to a Gekco 201X, runs smooth.

More testing, swapped the thumping stepper to a Gekco 201X, runs smooth. Ian Eliason

39 views - 3 months ago

Steppers may be poling.

Steppers may be poling. Ian Eliason

277 views - 3 months ago

Found a way to get the Photo Mos relays working with 12v on the output side.

Found a way to get the Photo Mos relays working with 12v on the output side. Ian Eliason

81 views - 3 years ago

It all works, now to put it back into the Masso DTHC.

It all works, now to put it back into the Masso DTHC. Ian Eliason

74 views - 3 years ago

Working with capacitive Fibre Laser head sensor.

Working with capacitive Fibre Laser head sensor. Ian Eliason

78 views - 3 years ago

Add a multiplication to the drawing, can start seeing the 25M/ minute.

Add a multiplication to the drawing, can start seeing the 25M/ minute. Ian Eliason

35 views - 4 years ago

Yun Duan servos and drivers working with Masso.

Yun Duan servos and drivers working with Masso. Ian Eliason

201 views - 4 years ago

1st C-BEAM small format Router / Laser / Plasma by Lilow TM / Aust.

1st C-BEAM small format Router / Laser / Plasma by Lilow TM / Aust. Ian Eliason

285 views - 4 years ago

xPro V5, Z axis touch off.

xPro V5, Z axis touch off. Ian Eliason

295 views - 4 years ago

People said you couldn't work with Nema17 with the xPRO V5, wrong.

People said you couldn't work with Nema17 with the xPRO V5, wrong. Ian Eliason

132 views - 4 years ago

Early steps to making this xPRO V5 to accept torch height control for Plasma control a THC.

Early steps to making this xPRO V5 to accept torch height control for Plasma control a THC. Ian Eliason

448 views - 4 years ago

It takes time to get this xPROV5 together.

It takes time to get this xPROV5 together. Ian Eliason

44 views - 4 years ago

xPRO V5 is delivering the goods. The Z working a 6,000mm / min.

xPRO V5 is delivering the goods. The Z working a 6,000mm / min. Ian Eliason

1.1K views - 4 years ago

A simple thing about adding an "O" ring to stabilise backlash.

A simple thing about adding an "O" ring to stabilise backlash. Ian Eliason

30 views - 4 years ago

Working apposing bushes on an unknown lead screw.

Working apposing bushes on an unknown lead screw. Ian Eliason

16 views - 4 years ago

Working with the xPRO V5 with 5 to 1 Nema17 reductions steppers.

Working with the xPRO V5 with 5 to 1 Nema17 reductions steppers. Ian Eliason

229 views - 4 years ago

Working GRBL files now xPro V5. Some said it wouldn't work with Nema17

Working GRBL files now xPro V5. Some said it wouldn't work with Nema17 Ian Eliason

141 views - 4 years ago

What you have to do ,xPRO V5.

What you have to do ,xPRO V5. Ian Eliason

1.4K views - 4 years ago

Working with xPro V5, bumping speed rates for the Nema17 without a heat problem. Now 5,000 mm/min.

Working with xPro V5, bumping speed rates for the Nema17 without a heat problem. Now 5,000 mm/min. Ian Eliason

157 views - 4 years ago

Dialling in the xPRO V5 as the given Marco is too course for real true control.

Dialling in the xPRO V5 as the given Marco is too course for real true control. Ian Eliason

169 views - 4 years ago

IMG 9210 Ian Eliason

5 views - 4 years ago

IMG 9205 Ian Eliason

6 views - 4 years ago

IMG 9199 Ian Eliason

9 views - 4 years ago

IMG 9188 Ian Eliason

11 views - 4 years ago

Finally working step and direction mode with the Animatic Smart Motors.

Finally working step and direction mode with the Animatic Smart Motors. Ian Eliason

76 views - 4 years ago

Animatics Smart Motor working with Masso.

Animatics Smart Motor working with Masso. Ian Eliason

127 views - 4 years ago

Moog-Animatics, one works with Masso the other doesn't. Not yet, but it will.

Moog-Animatics, one works with Masso the other doesn't. Not yet, but it will. Ian Eliason

31 views - 4 years ago

Second take, still learning Animmatis / Smart Motor

Second take, still learning Animmatis / Smart Motor Ian Eliason

10 views - 4 years ago

Animatics Smart Motor, trying to configure.

Animatics Smart Motor, trying to configure. Ian Eliason

66 views - 4 years ago

There are different THC's out there.

There are different THC's out there. Ian Eliason

23 views - 4 years ago

Screen shot, old G2 Masso controller with THC working.

Screen shot, old G2 Masso controller with THC working. Ian Eliason

76 views - 4 years ago

Z axis, old G2 Masso.

Z axis, old G2 Masso. Ian Eliason

26 views - 4 years ago

Lilow THC now working with Masso v4.01 Plasma software

Lilow THC now working with Masso v4.01 Plasma software Ian Eliason

200 views - 4 years ago

It works with stepper motors, now with Aussie built and designed products working, servo motors now.

It works with stepper motors, now with Aussie built and designed products working, servo motors now. Ian Eliason

52 views - 5 years ago

Testing a Pittman servo with Machdrives step/ direction driver.

Testing a Pittman servo with Machdrives step/ direction driver. Ian Eliason

254 views - 5 years ago

Tom 33 coupe Ian Eliason

169 views - 5 years ago

Lilow THC working perfectly

Lilow THC working perfectly Ian Eliason

184 views - 5 years ago

After 2 cuts, just lost the signal to Masso on the third set. Then problems.

After 2 cuts, just lost the signal to Masso on the third set. Then problems. Ian Eliason

35 views - 5 years ago

Now G3 Masso negative trigger.

Now G3 Masso negative trigger. Ian Eliason

29 views - 5 years ago

THC screenshot.

THC screenshot. Ian Eliason

39 views - 5 years ago

Lilow THC with Masso, cutting 2400mm / 4mm part.

Lilow THC with Masso, cutting 2400mm / 4mm part. Ian Eliason

121 views - 5 years ago

IMG 7843 Ian Eliason

44 views - 6 years ago

Standalone THC with Masso showing Plasma voltage and board LED changes.

Standalone THC with Masso showing Plasma voltage and board LED changes. Ian Eliason

178 views - 6 years ago

IMG 7684 Ian Eliason

24 views - 6 years ago

IMG 75441 Ian Eliason

16 views - 6 years ago

IMG 7542 Ian Eliason

74 views - 6 years ago

IMG 7543 Ian Eliason

9 views - 6 years ago

IMG 73991 Ian Eliason

22 views - 6 years ago

DSCF1605 Ian Eliason

39 views - 6 years ago

DSCF1495 Ian Eliason

144 views - 6 years ago

IMG 67441 Ian Eliason

260 views - 6 years ago

IMG 66651 Ian Eliason

222 views - 6 years ago